Rack mount

X5400 rack mount touch PC and monitor

An all-in-one touch PC in a carbon steel enclosure for a standard 19" server or network rack, fixed with cage nuts. Proven in industrial environments, for automation, process control and SCADA.

12.1–18.5"Screen sizes
19"EIA-310 rack, 4 to 8 RU
10–30 V DCStandard power
G5Intel Gen 11 or ARM
X5400 rack mount touch PC
Type
Screen size
Touch
X5415-C5-RTQuantity 1

Specifications

Display12.1", 15" 1024 × 768 (4:3); 17" 1280 × 1024 (5:4); 15.6", 18.5" 1920 × 1080 (16:9)
Brightness300 nits standard (1000 nits option)
TouchResistive or projected capacitive (PCAP)
ProcessorIntel Core i5-1135G7 (standard), Core i7-1165G7 or Celeron 6305U; ARM RK3588S
Memory8 GB DDR4 (16, 24 or 40 GB option)
Storage128 GB industrial SSD (256 GB, 512 GB or 1 TB option); ARM: 128 GB eMMC
Ports4 × USB 3.0, 2 × Ethernet 1000 Mbps, HDMI, mini DisplayPort, 3.5 mm audio; serial and CAN options
EnclosureCarbon steel, powder coated
Power10–30 V DC, 3-pin connector
Mounting19" rack (EIA-310), 4 to 8 RU, cage nuts
Operating temperatureA guide, not a guarantee. It depends on how and where the product is installed: see the note at the foot of the page.−10 °C to 50 °C

* A guide. The temperature a product runs at depends on how and where it is installed: processor load, airflow and clearance behind it, the cabinet or enclosure it sits in, sunlight and the air around it. One figure cannot cover every installation. Tell us about yours and we will confirm what suits it.

Standard on every X5400

  • Carbon steel enclosure
  • 19" rack mount (EIA-310), cage nuts
  • Cables exit from the bottom
  • 4 × USB 3.0, 2 × Ethernet, HDMI, mini DisplayPort
  • 10–30 V DC power input
  • TPM 2.0
  • Network boot (PXE)

Downloads

PDF
Datasheet for this buildX5400 · generated from your choices
Open
DWG
Cut-out and mounting drawingsFor your model, on request
Ask for drawings
PDF
ManualThe range
To supply
ZIP
DriversWindows and Linux
Downloads

Where it is used

  • Fits a 19" rack (EIA-310) with a standard cage nut system.
  • Cables leave from the bottom; the front stays clear for maintenance and upgrades.
  • Used for SCADA and MES, data acquisition, networking and plant automation.
  • Also as a touch monitor, or a KVM monitor up to 100 m from its computer over one CAT6 cable.
The range

About the X5400

The X5400 is a rack mount touch PC for a standard 19" server or network rack: an all-in-one industrial touch computer in a steel enclosure to EIA-310, 4 to 8 RU, fixed with cage nuts, with a matte black finish. It is made from 12.1" to 18.5" with resistive or PCAP touch, on an Intel Generation 11 processor or ARM RK3588S with TPM 2.0, running Windows 11 IoT Enterprise LTSC or Linux.

Cables leave from the bottom, so the front stays clear for maintenance and upgrades. The X5400 is used in automation and process control, SCADA and MES, data acquisition and networking, in control rooms and plant racks. It is also sold as a rack mount touch monitor, or a KVM monitor up to 100 m from its computer; the XC5400 is the 1U rack PC with no screen.

As a touch monitor or KVM monitor

The X5400 is also made with no computer inside. As a touch monitor it shows the picture from a computer or PLC nearby and sends the touch back to it. As a KVM monitor it takes video and touch from its computer up to 100 m away over one CAT6 cable, so the computer can stay in a dry, clean room.

Both use the same enclosure as the X5400 panel PC, in 12.1" to 18.5". Choose Touch monitor or KVM monitor under Type above to see the model codes and the video inputs, or compare every range on the touch screen monitors page.

Contact us

Talk to our North American team.

Tell us where it has to work and what it has to do, for a quick reply.

Call our North American team
Lake Forest, CA+1 (949) 430-0552Call
Toronto+1 (416) 972-0631Call
Mon–Fri 8:00–17:00 PT
USA officeLake Forest, CA 92610, USA

STX Technology worldwide

Talk to our North American team, with STX Technology in New Zealand, Australia, the UK and North America.