Industrial touch screen monitors and KVM monitors
Every STX Technology range is offered as a touch monitor, and most as a KVM monitor too: 8.4" to 55", in stainless steel or aluminum, waterproof or for dry areas, with resistive or PCAP touch. The same enclosure and options as the panel PC, without the computer inside.

A touch monitor or a KVM monitor
A touch monitor takes the picture from a computer nearby over HDMI, DVI, VGA or DisplayPort, and sends the touch back over USB or RS232. Use it when the computer already exists: in a control cabinet, a rack or a PLC panel.
A KVM monitor has the receiving end of a KVM extender built in. Video, touch, keyboard and mouse travel up to 100 m over one CAT6 cable, so the computer stays in a dry, clean room and only the screen goes on the line. Use it for a washdown area, a freezer or anywhere a computer should not be.
Both are the same products as the STX Technology panel PCs, with the same enclosures, sizes, touch types, brightness and mounting options.
The monitor ranges
| Range | Sizes | Material | Enclosure | Touch | Mounting |
|---|---|---|---|---|---|
| X7000 stainless waterproof | 10.4" to 24" | 304 stainless (316 option) | IP66* / NEMA 4X* | Resistive | Side bolts or VESA 100 |
| X9000 stainless, protected connectors | 10.4" to 24" | 304 stainless (316 option) | IP66* / NEMA 4X* | Resistive | Side bolts or VESA 100 |
| X7500 stainless waterproof | 8.4" to 27" | 304 stainless (316 option) | IP66* / NEMA 4X* | Resistive or PCAP | VESA or panel mount |
| X7600 aluminum waterproof | 8.4" to 27" | Aluminum | IP66* / NEMA 4X* | Resistive or PCAP | VESA or panel mount |
| X7200 stainless panel PC | 8.4" to 27" | 304 stainless (316 option) | Dry areas | Resistive or PCAP | VESA (panel mount option) |
| X7300 aluminum panel PC | 8.4" to 27" | Aluminum | Dry areas | Resistive or PCAP | VESA or panel mount |
| X5200 stainless panel mount | 10.1" to 24" | 304 stainless front (316 option) | Panel front | Resistive or PCAP | Panel mount, with a gasket |
| X7500 large format | 32", 43" and 55" | 304 stainless (316 option) | IP66* / NEMA 4X* | PCAP or no touch | VESA; panel mount option |
| X7600 large format | 32", 43" and 55" | Aluminum | IP66* / NEMA 4X* | PCAP or no touch | VESA; panel mount or side studs |
| X7200 large format | 32", 43" and 55" | 304 stainless (316 option) | Dry areas | PCAP or no touch | VESA; panel mount option |
| X7300 large format | 32", 43" and 55" | Aluminum | Dry areas | PCAP or no touch | VESA; panel mount option |
| XRH7000 vehicle mount | 8.4" to 15.6" | Aluminum | IP67 / IP68 connectors (NEMA 6 equivalent) | Resistive (PCAP from 10.4") | VESA 75 with RAM ball |
Choose a range

X7500 stainless waterproof monitor
8.4" to 27"
Touch or KVM monitor for washdown, resistive or PCAP.
Choose options
X7000 stainless waterproof monitor
10.4" to 24"
Touch or KVM monitor for washdown areas.
Choose options
X9000 heavy washdown monitor
10.4" to 24"
Protected connectors for the wettest areas.
Choose options
X7600 aluminum waterproof monitor
8.4" to 27"
Lighter than stainless, for wet areas.
Choose options
X7200 stainless monitor
8.4" to 27"
For factories, warehouses and offices.
Choose options
X5200 panel mount monitor
10.1" to 24"
Into a cut-out, with a gasket.
Choose options
Large format monitors
32", 43" and 55"
Status boards and information screens, 4K at 43" and 55".
Choose options
XRH7000 vehicle monitor
8.4" to 15.6"
For forklifts, trucks and machines.
Choose optionsTouch monitor questions
What is an industrial touch screen monitor?
A touch screen with no computer inside, built for a plant rather than an office: a metal enclosure, a fanless design, industrial connectors and a touch screen that works with gloves or wet hands. It shows the picture from a computer or PLC nearby and sends the touch back.
Touch monitor or KVM monitor: which do I need?
A touch monitor when the computer is within a few meters, connected by video and USB cables. A KVM monitor when the computer should be further away, up to 100 m over one CAT6 cable, for example in a dry room away from the washdown.
Which inputs does a touch monitor take?
HDMI, DVI, VGA or DisplayPort for the picture, and USB or RS232 for the touch.
Are the monitors waterproof?
The X7000, X9000, X7500 and X7600 (and the X7500 and X7600 large formats) are IP66* / NEMA 4X*, with IP67 / IP68 connectors (NEMA 6 equivalent). The X7200, X7300 and X5200 are for dry areas or a panel front.
Do the monitors work with gloves?
Resistive touch works with any glove, a wet hand or a stylus. PCAP is a glass front that works with a bare hand or a thin glove and is easy to clean. Most ranges offer both.
Are the screens optically bonded?
No. STX Technology screens are not optically bonded, which keeps them more serviceable long term.
Can a touch monitor be panel mounted?
Yes, on the X5200, the X7200 and X7300, and the X7500 and X7600 as monitors. The panel mount monitors page lists the sizes.
What sizes are there?
From 8.4" to 55": every size has its own page under Touch screens by size.
Which monitor for your line?
Tell us what it connects to, how far the computer is from the screen, and how the area is cleaned. A technical person replies with the range and options that suit.
Talk to our North American team.
Tell us where it has to work and what it has to do, for a quick reply.
STX Technology worldwide
Talk to our North American team, with STX Technology in New Zealand, Australia, the UK and North America.
* IP66 and NEMA 4X equivalent: a guide to the protection the enclosure gives. Washdown differs from plant to plant (pressure, temperature, chemicals, distance). Tell us about yours and we will confirm what suits it. IP69K is an option, not the standard. For some models and sizes it may still be in development: ask us whether it is available for yours.
